Archive for December 2006
You are browsing the archives of 2006 December.
You are browsing the archives of 2006 December.
With the electric guitar body finished, it was time to begin my guitar project’s final assembly. While I was at it, I loaded in the guitar’s switch, volume and output jack to see how the guitar will look in its final state. As you can see, I kept the guitar’s electronics simple. Gold Lace Sensor […]
With the final bit of routing complete on my guitar project, I turned to finishing the guitar. After researching the subject, I decided to go with a simple DIY solution – Watco Danish Oil. Before starting the finish, I had a few small dents in the guitar body that I wanted to address. I used […]
Continuing with my electric guitar project, I completed the pickup cavities and control cavity after deciding against the combination of rear routing and front routing that the original Klein guitar uses. I decided rear routing was preferable. I did a quick test fit of the controls and everything looked good. For the pickup cavities, I […]
Here is another YouTube video of fingerstyle guitarist Adrian Legg playing his custom ergonomic guitar – this one from his instructional video How To Become a More Creative Guitarist-An Insider’s Tips for Fingerstyle Players. For more of Adrian Legg check out these DVD’s: Adrian Legg: Fingerpicking And Open Tunings A Fingerstyle Summit with Adrian Legg, […]
The electric guitar build is proceeding well – the forearm cut and belly contour are complete. In addition, the angled lower strap button area is done. For the belly contour I used a combination of an 80 grit sanding disc on an electric drill to take away the bulk of the material followed by hand […]